Been searching for info about the toroids from Altronics. Setting up a band pass filter for the QRSS receiver.
The L4534 seems to be the same dimensions as the T130-2.
OD = 1.30 / 33.0 mm +/- 0.02 in
ID = .780 in / 19.8 mm +/- 0.02 in
Ht = .437 in / 11.1 mm +/- 0.025 in
Also I've found a useful site on the standard sizes.
The T130-2 has a AL of 11 +/-5%. So then to calculate the inductance like so; uH=(AL*Turns2)/1000
The L4517 does not match up to any of the standard sizes. Its just a bit bigger than the T50-2. So I'll use that as a model and obviously subtract some turns ...
I have three of the L4517's would with 36 turns of 0.5mm enabled wire for an inductance of 12uH. Now to pick out the capacitors for the BPF. Then find the smallest way to build it all up on copper clad board for the Pixie2 in the Haighs tin.
kim vk5fnet
No comments:
Post a Comment